21 inch Monochrome Medical Monitor
21” LCD GRAYSCALE MEDICAL MONITOR
DIAGNOSTIC GRAYSCALE MEDICAL MONITOR with touch screen
Model No. LCD MMD-2213M
Only £Click Here
Features :
High spec, Diagnostic Grayscale high end Medical Monitor.
2 megapixels monochrome top flight medical monitor complete with calibration kit.
Uniform Luminance
Uniform luminance is especially critical for diagnostic applications, this range of diagnostic medical monitors have been designed with this in mind.
Individual calibration and bench testing ensures that every customer gets the best possible results from each of our medical monitors for diagnostic applications.
Backlight Stabilizer
The GeniGUARD® built-in backlight stabilizer integrated in
our diagnostic medical monitors automatically calibrates the shift of LCD brightness
caused by startup drift, ambient temperature and backlight aging.
GrayBoost® 12-bit Simultaneous Grayscale
12-bit (4096 tones) image input can be all retained in 12-bit (4096 tones)
image output via built-in 12-bit LUT. The IEI GrayBoost® technology
successfully produces 12-bit image data flow through commercial dual-link
graphic card, lowering total cost of ownership.
GeniSPOT® & GeniPASS® QC Solution
Packed with each 21” LCD Diagnostic grayscale medical monitor is the GeniSPOT® 3-in-1 calibration system and GeniPASS® QC Utility, which ensures the display conforms with AAPM, DIN, JIS and IEC standards all the time.
Functions:
• Luminance testing
• DICOM calibration
• Luminance auto-dimming
• GeniSPOT® self-diagnosis
• Five-point testing of uniformity
SPECIFICATIONS: 21” LCD Diagnostic medical monitor
Model- MMD: 2213M
Drive System: a-Si TFT active matrix
Display area: (H x V) 433.2mm x 324.9 mm
Diagonal size of display: 54cm (21.3 inches)
Resolution: (H x V) 1600 x 1200
Pixel pitch: (H x V) 0.270mm x 0.270 mm
Sub-pixel pitch: (H x V) 0.090mm x 0.270 mm
Pixel format: 1 pixel consists of 3 sub-pixels, LCR vertical stripe
Luminace-max: 1000cd/m2
Max. Luminance: (calibrated) 600cd/m2
White chromaticity: Wx, Wy=(0.280, 0.304) (typical)
Contrast ratio: 700:1 (typical)
Viewing angle: Right 85°, Left 85°, Up 85°, Down 85° (10:1 contrast)
Response time: (Ton + Toff) 35ms (typical)
Polarizer: surface/ hardness Antiglare/ 2H
Backlight: 6 CCFL
Default gamma: DICOM
Grayscale Simultaneous: 12-bit
LUT: 12-bit
Signal input: Single link DVI-D (digital)
USB : 2.0 hub 1 upstream/ 2 downstream
Membrane keypad: Yes
Power adapter Input voltage range: 100VAC - 240VAC
Power adapter Input frequency: range 47Hz-63Hz
Power adapter Input AC current: 1.25A-0.5A
Power adapter Power output: 12VDC, 8.33A, 100W (max)
Physical dimensions: (H x W x D) With stand: 520mm x 380mm x 274 mm (portrait)
Without stand: 485mm x 380mm x 100 mm (portrait)
Adjustable height range (with stand): Portrait: 520mm~590 mm Landscape: 465mm~535 mm
Operating temperature: 10°C~40°C
Storage temperature: -20°C~60°C
Operation relative humidity: 30% ~75% Non-condensing
Storage/ Transportation: Relative humidity 10% ~95% Non-condensing
All information correct at time of going to press. Design and specification are subject to change without prior notice. E&EO
